Question 1

Lion Alarm Operation Manual

Accepted Answer

https://video.wixstatic.com/video/6037fa_fd98eefe2b344ae6a1f701532e417307/720p/mp4/file.mp4

1. Standby mode (Power ON)
A short press of the button turns on the power and enters standby mode for 60 seconds.
During the 60 seconds, LION ALARM will not detect any vibration, allowing you to move the bicycle or lock in preparation for parking.

2. Sleep mode (60 seconds after power on)
After 60 seconds, a "beep" sound is heard and the device enters sleep mode. During locking, the device will always remain in this state until LION ALARM detects a vibration.

3. Warning mode (vibration detection)
During sleep mode, when LION ALARM detects vibration, it sounds “PiPi” as a beep and switches to warning mode for 8 seconds, after 8 seconds it sounds a “PiPiPi” as a beep and switches to alarm mode.
The warning mode has the following roles

・A safety function to prevent a loud alarm from suddenly sounding when an erroneous vibration is detected.
・Time for the motorcycle owner to release the security
・Warning sound when malicious vibration is detected

4. Alert mode (after 8 seconds in warning mode)
When switched to this mode, the next vibration detection will sound an alarm. The alarm will automatically stop after 10 seconds, and will continue to sound if the vibration continues to be detected. If the alarm stops and no vibration is detected for 30 seconds, the device will return to sleep mode. After switching to alert mode, if no vibration is detected, the device will return to sleep mode after 30 seconds without sounding an alarm.

Question 2

How to check the battery level

Accepted Answer

https://video.wixstatic.com/video/6037fa_566d8c8eeadc47d5bd0328740c397a78/720p/mp4/file.mp4

The remaining battery charge can be checked by pressing the button twice.

Number of beeps and estimated remaining battery charge

1　20%
2　40%
3　60%
4　80%
5　100%

Question 3

Three volume settings are available.-

Accepted Answer

https://video.wixstatic.com/video/6037fa_1a1e430df9634f4a8c6f9aab7b86c6dc/720p/mp4/file.mp4

Pressing and holding the button for about 3 seconds will sound the alarm and switch to setting mode. Each single press of the button changes the volume in 3 levels, so if you press and hold the button again, the volume will be set to your preference.

- Volume Level -
60dB / 90dB / 120dB

Question 4

How to Attach and Detach the K4 SeriesHow to Attach and Detach the K4 Series

Accepted Answer

https://video.wixstatic.com/video/6037fa_3f5b5b8765fb4df49cc8757f23d93e79/720p/mp4/file.mp4

The K4 series can be docked by pushing the connection button on the LION ALARM with a pointed object. (It can only be removed when the lock is unlocked.)

LOIN ALARM

<An Alarm that can be Docked to the Lock.>

LION ALARM + K4

LION ALARMをドッキングすると、ロックが振動や衝撃を感知した際に大音量の警報を発し、愛車を守ります。
取り外しも簡単で、充電や単体使用も可能です。

SPEC.

LOIN ALARM

<An Alarm that can be Docked to the Lock.>

LION ALARM + K4

LION ALARMをドッキングすると、ロックが振動や衝撃を感知した際に大音量の警報を発し、愛車を守ります。取り外しも簡単で、充電や単体使用も可能です。

SPEC.

LION ALARMをドッキングすると、ロックが振動や衝撃を感知した際に大音量の警報を発し、愛車を守ります。
取り外しも簡単で、充電や単体使用も可能です。